If you want to ensure a clean window, a pressure washer is a good option. However, there are a few things you need to keep in mind to ensure that the job is done properly.
Here are 9 tips for using a pressure washer:
1. Use The Right Nozzle
The nozzle you use will impact the amount of pressure that’s applied to the window. If you use a nozzle with too much pressure, it can damage the glass. Conversely, if you use a nozzle with too little pressure, the cleaning won’t be effective. Therefore, it’s important to use the right nozzle for the job.
The type of nozzle you use will determine the kind of results you get. For instance, if you use a fan nozzle, it will create a wide spray pattern that is ideal for cleaning large surfaces. Conversely, if you use a pencil nozzle, it will create a narrow spray pattern that is better for getting into tight spaces and corners.
2. Adjust The Pressure
Depending on the surface you’re cleaning, you’ll need to adjust the pressure accordingly. For example, if you’re cleaning delicate surfaces like windows, you’ll need to use a lower pressure setting. On the other hand, if you’re cleaning tougher surfaces like concrete, you’ll need to use a higher pressure setting.
Set the pressure washer to a low setting before you start cleaning the window. This will help prevent any damage to the glass.
3. Use The Right Detergent
Not all pressure washers are created equal and some are better equipped than others when it comes to using detergents. If your pressure washer has a built-in soap dispenser, then you can simply add the detergent to that. Otherwise, you’ll need to use a separate container and attach it to the pressure washer’s hose.
Use a cleaning solution designed specifically for windows. This will help remove any dirt or grime that may be clinging to the surface of your window.
4. Start From The Top
When you’re ready to start cleaning, make sure you start from the top and work your way down. This will help prevent streaks and ensure that all of the dirt and grime are removed.
5. Hold The Wand At The Right Angle
When you’re cleaning the window, hold the wand at a 45-degree angle. This will help to avoid streaking and ensure that the entire surface of the window is being cleaned.
Hold the pressure washer at an angle so that the water stream hits the window at a downward angle. This will help prevent scratches on the glass.
6. Move The Wand In A Back-And-Forth Motion
When you’re cleaning the window, be sure to move the wand in a back-and-forth motion. This will help to loosen any dirt or grime that’s on the surface of the window.
7. Move The Wand In A Side-To-Side Motion
As you move the wand across the window, be sure to do so in a side-to-side motion. This will help to avoid missed spots and ensure that the entire surface of the window is being cleaned.
8. Rinse Thoroughly
Once you’re done cleaning, be sure to rinse the area thoroughly with clean water. This will help remove any residual detergent and ensure that the area is completely clean. This will help remove any soap residue that could cause streaks on the glass.
9. Dry The Window
Once you’ve pressure washed and rinsed the window, be sure to dry it off. This will help to prevent water spots from forming on the glass.
Following these tips will help you get the best results when using a pressure washer to clean your windows without damaging them. Be sure to exercise caution and take your time to avoid damaging your windows. Inspect them afterwards to ensure a streak-free, sparkling clean.
If you wanted to hire a professional pressure washing company, click additional hints to redirect you to a pressure washing company.
Leave a Reply